Ford Mustang (1999-2004) Service Manual: Door Speaker - Upper
Removal and Installation
1. Remove the front door trim panels (239420). For additional information, refer to Section
2. Remove the upper speaker access cover.
3. Remove the upper speaker housing.
1. Remove the screw.
2. Remove the upper speaker housing.
3. Disconnect the electrical connector
4. To install, reverse the removal procedure.
Speakers
Torque Specifications
Speakers
NOTE: Premium sound speakers (18808) are labeled with either 6
OHMS or 8 OHMS.
The coupe has a four-speaker system, with two door-mounted
speakers and tw ...
Door Speaker - Lower
Removal and Installation
1. Remove the front door trim panel (239420). For additional
information, refer to Section
2. Remove the speaker (18808).
1. Remove the screws.
2. Disconnect ...
Other materials:
Compressor Manifold and Tube Assembly - 3.8L
Material
Item
Specification
PAG Refrigerant Compressor
Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-
12-C)
WSH-M1C231-
B
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when
repairing the ...
Installation
1. Align the blend door driver to the full heat position.
2. Place the temperature control knob in the full WARM position.
3. Attach the cable drive to the control head.
4. Rotate the knob back and forth from full WARM to full COOL.
5. Check the cable ...
Clutch Pedal - Quadrant and Pawl Assembly
Removal
1. Disconnect the battery ground cable (14301).
2. Loosen the nut from inside the engine compartment.
3. Loosen the nuts from inside the vehicle.
4. Loosen the screw.
5. Disconnect the brake pedal position (BPP) switch electrical connector.
...
