Ford Mustang (2005-2014) Owners Manual: Under hood overview

3.7L V6 Engine

A. Battery
B. Engine oil dipstick
C. Engine oil filler cap
D. Brake fluid reservoir
E. Air filter assembly
F. Engine coolant reservoir
G. Windshield washer fluid reservoir
H. Power distribution box

5.0L V8 Engine

A. Battery
B. Engine oil filler cap
C. Engine oil dipstick
D. Brake fluid reservoir
E. Air filter assembly
F. Engine coolant reservoir
G. Windshield washer fluid reservoir
H. Power distribution box

Engine Shield

Some vehicles may be equipped with an aero-shield under the engine.

Remove the front fasteners of the shield to gain access for service.

This includes oil and filter changes.

    Opening and closing the hood
    1. Inside the vehicle, pull the hood release handle located on the driver’s side kick panel. 2. Go to the front of the vehicle and release the auxiliary latch that is located under the front cente ...

    Engine oil dipstick
    A. MIN B. MAX ...

    Other materials:

    Wheel Hub or Axle Flange Face Runout
    NOTE: If the axle shaft assembly is removed, check runout of the shaft itself. The forged (unmachined) part of the shaft is allowed to have as much as 3.0 mm (0.120 inch) runout. This alone will not cause a vibration condition. 1. Position the special tool ...

    Engine coolant check
    Checking the Engine Coolant The concentration and level of engine coolant should be checked at the intervals listed in Scheduled Maintenance Information. Note: Make sure that the level is at the FULL COLD level or within the COLD FILL RANGE in the coolant res ...

    Installation
    1. CAUTION: Do not allow grease, oil, brake fluid or other contaminants to contact the pad lining material. Do not install contaminated pads. NOTE: Install all hardware supplied with pad kits. Install the pads. 1. Install the new pad slippers. ...