Ford Mustang (1999-2004) Service Manual: Suspension
- Suspension System - General Information
- Wheel Alignment Angles
- Suspension System
- Camber and Caster Adjustment - Front
- Camber Adjustment - Rear
- Toe Adjustment - Front
- Toe Adjustment - Rear
- Front Suspension
- Wheel Studs
- Wheel Hub and Bearing
- Arm - Lower
- Bar - Stabilizer
- Link - Stabilizer Bar
- Bushing - Stabilizer Bar
- Spindle
- Shock Absorber
- Spring
- Rear Suspension
- Rear Suspension (Description and Operation)
- Wheel Hub - Cobra
- Wheel Studs
- Upper Arm
- Upper Arm - Cobra
- Lower Arm
- Stabilizer Bar
- Stabilizer Bar - Cobra
- Link - Stabilizer Bar
- Wheel Knuckle - Cobra
- Toe Link - Cobra
- Spring - Coil
- Spring - Cobra
- Shock Absorber
- Damper
- Wheels and Tires
Wheel Bearing Check
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspens ...Suspension System - General Information
Alignment Specifications General Specifications Torque Specifications Description Nm lb-ft Front suspension camber adjustment plate bolt 40 30 Front suspension camber adju ...Other materials:
Removal
1. Use a suitable suction device to lower the brake fluid level in
the master cylinder reservoir.
2. Raise and support the vehicle.
3. Remove the wheel and tire assembly.
4. Inspect the pads for wear or contamination, install new if worn to ...
Side airbags
WARNING: Do not place objects or mount equipment on or near
the airbag cover, on the side of the seat backs (of the front seats),
or in front seat areas that may come into contact with a deploying airbag.
Failure to follow these instructions may increase the ...
Connecting Rod - Side Clearance
1. Measure the clearance between the connecting rod and the crankshaft.
Verify the measurement
is within specification.
Refer to the appropriate section in Group for the procedure.
If out of specification, install new components as necessary. Refer
...