Ford Mustang (2005-2014) Owners Manual: Vehicle Care

GENERAL INFORMATION

Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes.

Bulb specification chart
Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized D.O.T. for North America and an E for Europe to ensure lamp performance, light brightness and patte ...

Cleaning products
For best results, use the following products or products of equivalent quality: Motorcraft Bug and Tar Remover (ZC-42) Motorcraft Custom Bright Metal Cleaner (ZC-15) Motorcraft Detail Wash (ZC-3-A) Mo ...

Other materials:

Disassembly
1. CAUTION: Do not place the cylinder head flat on the bench; the valves will bend. CAUTION: Before disassembly begins, mark the valve position on the face of each valve being removed. The valves must be re-installed into the same positions. Install the spec ...

Installation
1. Install the lower intake manifold gaskets. 2. Connect the fuel charging wiring harness to the rear of the lower intake manifold and install the manifold. 3. Install the intake manifold fasteners and tighten in the sequence shown. 4. Position the fuel ...

Cooling System Draining, Filling and Bleeding
Material Item Specification Motorcraft Premium Gold Engine Coolant VC-7-A (in Oregon VC-7-B) (yellow color) WSS-M97B51- A1 Draining WARNING: Never remove the pressure relief cap while the engine is operating or when the cooling syst ...